> Resources

Resources

Stamping die maintenance is divided into two levels

Before mold installation, clean the upper and lower surfaces of the mold to ensure that the mold installation surface and the press worktable are not damaged and the upper and lower installation surfaces of the mold are parallel during production.

Ptimization of stamping die maintenance methods

The daily maintenance of stamping dies is to check the state and appearance of the dies according to the maintenance benchmark, maintenance plan and maintenance requirements, so as to detect and eliminate faults as early as possible.

Stamping Product Introduction - Stainless Steel Elbow

Stainless steel stamping elbow is a common pipe connection component, and its manufacturing process is very critical. First, high-quality stainless steel materials are selected as raw materials to ensure the corrosion resistance and strength of the product.

Stamping product introduction - the manufacturing process of razor blades and its key steps

How are the razor blades commonly used in daily life produced? It needs to go through more than a dozen processes, and each process must be strictly handled before the 0.1mm stainless steel sheet can be ground into an extremely sharp finished product.

Prevention and control of cracking and hidden cracks in stamping parts of automobile bodies

The size of the outer covering parts of automobile stamping is larger than that of the internal parts, and the shape is more complex. The parts are drawn deeper during the forming process, the forming surface is complex, and other factors affect the products.

Stamping product introduction - copper clip

Copper clips are commonly used in high-performance electronic components and are a key interconnect component widely used in high-power packages, such as MOSFETs (metal oxide semiconductor field effect transistors) and IGBTs (insulated gate bipolar transistors). Copper clips can create electrical an......

<...2 3 4 5 6...13 >